A vulnerability was found in Keycloak. Deployments of Keycloak with a reverse proxy not using pass-through termination of TLS, with mTLS enabled, are affected. This issue may allow an attacker on the local network to authenticate as any user or client that leverages mTLS as the authentication mechanism.
A vulnerability was found in Keycloak. Expired OTP codes are still usable when using FreeOTP when the OTP token period is set to 30 seconds (default). Instead of expiring and deemed unusable around 30 seconds in, the tokens are valid for an additional 30 seconds totaling 1 minute. A one time passcode that is valid longer than its expiration time increases the attack window for malicious actors to abuse the …
A vulnerability was found in Keycloak. Expired OTP codes are still usable when using FreeOTP when the OTP token period is set to 30 seconds (default). Instead of expiring and deemed unusable around 30 seconds in, the tokens are valid for an additional 30 seconds totaling 1 minute. A one time passcode that is valid longer than its expiration time increases the attack window for malicious actors to abuse the …
A denial of service vulnerability was found in keycloak where the amount of attributes per object is not limited, an attacker by sending repeated HTTP requests could cause a resource exhaustion when the application send back rows with long attribute values. The issue is fixed in Keycloak 24 with the introduction of the User Profile feature.
An open redirect vulnerability was found in Keycloak. A specially crafted URL can be constructed where the referrer and referrer_uri parameters are made to trick a user to visit a malicious webpage. A trusted URL can trick users and automation into believing that the URL is safe, when, in fact, it redirects to a malicious server. This issue can result in a victim inadvertently trusting the destination of the redirect, …
Duplicate Advisory This advisory has been withdrawn because it is a duplicate of GHSA-xmmm-jw76-q7vg. This link is maintained to preserve external references. Original Description A vulnerability was found in Keycloak. Expired OTP codes are still usable when using FreeOTP when the OTP token period is set to 30 seconds (default). Instead of expiring and deemed unusable around 30 seconds in, the tokens are valid for an additional 30 seconds totaling …
A vulnerability was found in Keycloak. The LDAP testing endpoint allows changing the Connection URL independently without re-entering the currently configured LDAP bind credentials. This flaw allows an attacker with admin access (permission manage-realm) to change the LDAP host URL ("Connection URL") to a machine they control. The Keycloak server will connect to the attacker's host and try to authenticate with the configured credentials, thus leaking them to the attacker. …
Duplicate Advisory This advisory has been withdrawn because it is a duplicate of GHSA-c25h-c27q-5qpv. This link is maintained to preserve external references. Original Description A vulnerability was found in Keycloak. The LDAP testing endpoint allows changing the Connection URL independently without re-entering the currently configured LDAP bind credentials. This flaw allows an attacker with admin access (permission manage-realm) to change the LDAP host URL ("Connection URL") to a machine they …
A flaw was found in Keycloak. In certain conditions, this issue may allow a remote unauthenticated attacker to block other accounts from logging in.
Duplicate Advisory This advisory has been withdrawn because it is a duplicate of GHSA-cq42-vhv7-xr7p. This link is maintained to preserve external references. Original Description A flaw was found in Keycloak. In certain conditions, this issue may allow a remote unauthenticated attacker to block other accounts from logging in.
A flaw was found in the redirect_uri validation logic in Keycloak. This issue may allow a bypass of otherwise explicitly allowed hosts. A successful attack may lead to an access token being stolen, making it possible for the attacker to impersonate other users.
An incomplete fix was found in Keycloak Core patch. An attacker can steal authorization codes or tokens from clients using a wildcard in the JARM response mode "form_post.jwt". It is observed that changing the response_mode parameter in the original proof of concept from "form_post" to "form_post.jwt" can bypass the security patch implemented to address CVE-2023-6134.
The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented …
A flaw was found in Keycloak that prevents certain schemes in redirects, but permits them if a wildcard is appended to the token. This issue could allow an attacker to submit a specially crafted request leading to cross-site scripting (XSS) or further attacks. This flaw is the result of an incomplete fix for CVE-2020-10748.
A reflected cross-site scripting (XSS) vulnerability was found in the 'oob' OAuth endpoint due to incorrect null-byte handling. This issue allows a malicious link to insert an arbitrary URI into a Keycloak error page. This flaw requires a user or administrator to interact with a link in order to be vulnerable. This may compromise user details, allowing it to be changed or collected by an attacker.
A flaw was found in the offline_access scope in Keycloak. This issue would affect users of shared computers more (especially if cookies are not cleared), due to a lack of root session validation, and the reuse of session ids across root and user authentication sessions. This enables an attacker to resolve a user session attached to a previously authenticated user; when utilizing the refresh token, they will be issued a …
A flaw was found in Keycloak. Under specific circumstances, HTML entities are not sanitized during user impersonation, resulting in a Cross-site scripting (XSS) vulnerability.
A flaw was found in the Keycloak package, more specifically org.keycloak.userprofile. When a user registers itself through registration flow, the "password" and "password-confirm" field from the form will occur as regular user attributes. All users and clients with proper rights and roles are able to read users attributes, allowing a malicious user with minimal access to retrieve the users passwords in clear text, jeopardizing their environment.
A flaw was found in Keycloak. This flaw depends on a non-default configuration "Revalidate Client Certificate" to be enabled and the reverse proxy is not validating the certificate before Keycloak. Using this method an attacker may choose the certificate which will be validated by the server. If this happens and the KC_SPI_TRUSTSTORE_FILE_FILE variable is missing/misconfigured, any trustfile may be accepted with the logging information of "Cannot validate client certificate trust: …
A flaw was found in Keycloak in the execute-actions-email endpoint. This issue allows arbitrary HTML to be injected into emails sent to Keycloak users and can be misused to perform phishing or other attacks against users.
A flaw was found in Keycloak. This flaw allows impersonation and lockout due to the email trust not being handled correctly in Keycloak. An attacker can shadow other users with the same email and lockout or impersonate them.
When a service account with the create-client or manage-clients role can use the client-registration endpoints to create/manage clients with an access token. If the access token is leaked, there is an option to revoke the specific token. However, the check is not performed in client-registration endpoints.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') in org.keycloak:keycloak-core.
A Stored Cross-site scripting (XSS) vulnerability was found in keycloak as shipped in Red Hat Single Sign-On 7. This flaw allows a privileged attacker to execute malicious scripts in the admin console, abusing the default roles functionality.
A flaw was found in keycloak where an attacker is able to register himself with the username same as the email ID of any existing user. This may cause trouble in getting password recovery email in case the user forgets the password.
A flaw was found in Keycloak. This flaw allows a privileged attacker to use the malicious payload as the group name while creating a new group from the admin console, leading to a stored Cross-site scripting (XSS) attack.
A flaw was found in Keycloak. This vulnerability allows anyone to register a new security device or key when there is not a device already registered for any user by using the WebAuthn password-less login flow.
ClassLoaderTheme and ClasspathThemeResourceProviderFactory allows reading any file available as a resource to the classloader. By sending requests for theme resources with a relative path from an external HTTP client, the client will receive the content of random files if available.
Duplicate Advisory This advisory has been withdrawn because it is a duplicate of GHSA-4vc8-pg5c-vg4x. This link is maintained to preserve external references. Original Description A flaw was found in keycloak where an attacker is able to register himself with the username same as the email ID of any existing user. This may cause trouble in getting password recovery email in case the user forgets the password.
keycloak accepts an expired certificate by the direct-grant authenticator because of missing time stamp validations. The highest threat from this vulnerability is to data confidentiality and integrity.
A flaw was found in keycloak where a brute force attack is possible even when the permanent lockout feature is enabled. This is due to a wrong error message displayed when wrong credentials are entered. The highest threat from this vulnerability is to confidentiality.
A flaw was found in keycloack before version 8.0.0. The owner of 'placeholder.org' domain can setup mail server on this domain and knowing only name of a client can reset password and then log in. For example, for client name 'test' the email address will be 'service-account-test@placeholder.org'.
JBoss KeyCloak: XSS in login-status-iframe.html
A flaw was found in JBOSS Keycloak 3.2.1.Final. The Redirect URL for both Login and Logout are not normalized in org.keycloak.protocol.oidc.utils.RedirectUtils before the redirect url is verified. This can lead to an Open Redirection attack
A flaw was found in Keycloak 3.4.3.Final, 4.0.0.Beta2, 4.3.0.Final. When using 'response_mode=form_post' it is possible to inject arbitrary Javascript-Code via the 'state'-parameter in the authentication URL. This allows an XSS-Attack upon succesfully login.
It was found that SAML authentication in Keycloak 3.4.3.Final incorrectly authenticated expired certificates. A malicious user could use this to access unauthorized data or possibly conduct further attacks.
Due to improper authorization, Red Hat Single Sign-On is vulnerable to users performing actions that they should not be allowed to perform. It was possible to add users to the master realm even though no respective permission was granted.
A flaw was found in keycloak where keycloak may fail to logout user session if the logout request comes from external SAML identity provider and Principal Type is set to Attribute [Name].
A POST based reflected Cross Site Scripting vulnerability on has been identified in Keycloak.
A flaw was found in the Keycloak admin console, where the realm management interface permits a script to be set via the policy. This flaw allows an attacker with authenticated user and realm management permissions to configure a malicious script to trigger and execute arbitrary code with the permissions of the application user.
A flaw was found in keycloak before version 9.0.1. When configuring an Conditional OTP Authentication Flow as a post login flow of an IDP, the failure login events for OTP are not being sent to the brute force protection event queue. So BruteForceProtector does not handle this events.
A flaw was found in keycloak A Self Stored XSS attack vector escalating to a complete account takeover is possible due to user-supplied data fields not being properly encoded and Javascript code being used to process the data. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.
A flaw was found in Keycloak where it is possible to update the user's metadata attributes using Account REST API. This flaw allows an attacker to change its own NameID attribute to impersonate the admin user for any particular application.
A flaw was found in keycloak. Directories can be created prior to the Java process creating them in the temporary directory, but with wider user permissions, allowing the attacker to have access to the contents that keycloak stores in this directory. The highest threat from this vulnerability is to data confidentiality and integrity.
The new account console in keycloak can allow malicious code to be executed using the referrer URL. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.
A flaw was found in Keycloak where re-authentication does not occur while updating the password. This flaw allows an attacker to take over an account if they can obtain temporary, physical access to a user’s browser. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability.
A flaw was found in keycloak The client registration endpoint allows fetching information about PUBLIC clients (like client secret) without authentication which could be an issue if the same PUBLIC client changed to CONFIDENTIAL later. The highest threat from this vulnerability is to data confidentiality.
Keycloak suffers from an information disclosure through an error message. A logged in user can do an account email enumeration attack.
A flaw was found in keycloak In some scenarios a user still has access to a resource after changing the role mappings in Keycloak expiration of the previous access token.
A flaw was found in Keycloak, where it is possible to force the server to call out an unverified URL using the OIDC parameter request_uri. This flaw allows an attacker to use this parameter to execute a Server-side request forgery (SSRF) attack.
A flaw was found in Keycloak where an external identity provider, after successful authentication, redirects to a Keycloak endpoint that accepts multiple invocations with the use of the same state parameter. This flaw allows a malicious user to perform replay attacks.
It was found that Keycloak would permit a user with only view-profile role to manage the resources in the new account console, allowing access and modification of data the user was not intended to have.
A flaw was found in Keycloak, where it is possible to add unsafe schemes for the redirect_uri parameter. This flaw allows an attacker to perform a Cross-site scripting attack.
A flaw was found in Keycloak's data filter, where it allowed the processing of data URLs in some circumstances. This flaw allows an attacker to conduct cross-site scripting or further attacks.
A flaw was found in Keycloak where it does not perform the TLS hostname verification while sending emails using the SMTP server. This flaw allows an attacker to perform a man-in-the-middle (MITM) attack.
A flaw was found in Keycloak, where the code base contains usages of ObjectInputStream without type checks. This flaw allows an attacker to inject arbitrarily serialized Java Objects, which would then get deserialized in a privileged context and potentially lead to remote code execution.
A flaw was found in the reset credential flow which allows an attacker to gain unauthorized access to the application.
A flaw was found in Keycloak which allows a malicious user that is currently logged in, to see the personal information of a previously logged-out user in the account manager section.
A flaw was found in keycloak. A logged exception in the HttpMethod class may leak the password given as parameter.
A flaw was found in all versions of the Keycloak operator, before version 8.0.2,(community only) where the operator generates a random admin password when installing Keycloak, however the password remains the same when deployed to the same OpenShift namespace.
It was found in all keycloak versions before 9.0.0 that links to external applications (Application Links) in the admin console are not validated properly and could allow Stored XSS attacks. An authed malicious user could create URLs to trick users in other realms, and possibly conduct further attacks.
It was found that keycloak before version 8.0.0 exposes internal adapter endpoints in org.keycloak.constants.AdapterConstants, which can be invoked via a specially-crafted URL. This vulnerability could allow an attacker to access unauthorized information.
A vulnerability was found in Keycloak where the pages on the Admin Console area of the application are completely missing general HTTP security headers in HTTP-responses. This does not directly lead to a security issue, yet it might aid attackers in their efforts to exploit other problems. The flaws unnecessarily make the servers more prone to Clickjacking, channel downgrade attacks and other similar client-based attack vectors.
It was found that Keycloak's SAML broker, versions up to 6.0.1, did not verify missing message signatures. If an attacker modifies the SAML Response and removes the sections, the message is still accepted, and the message can be modified. An attacker could use this flaw to impersonate other users and gain access to sensitive information.
It was found that Keycloak's account console, up to 6.0.1, did not perform adequate header checks in some requests. An attacker could use this flaw to trick an authenticated user into performing operations via request from an untrusted domain.
A vulnerability was found in keycloak before 6.0.2. The X.509 authenticator supports the verification of client certificates through the CRL, where the CRL list can be obtained from the URL provided in the certificate itself (CDP) or through the separately configured path. The CRL are often available over the network through unsecured protocols ('http' or 'ldap') and hence the caller should verify the signature and possibly the certification path. Keycloak …
Keycloak up to version 6.0.0 allows the end user token (access or id token JWT) to be used as the session cookie for browser sessions for OIDC. As a result an attacker with access to service provider backend could hijack user’s browser session.
The SAML broker consumer endpoint in Keycloak before version 4.6.0.Final ignores expiration conditions on SAML assertions. An attacker can exploit this vulnerability to perform a replay attack.
It was found that keycloak before 3.4.2 final would permit misuse of a client-side /etc/hosts entry to spoof a URL in a password reset request. An attacker could use this flaw to craft a malicious password reset request and gain a valid reset token, leading to information disclosure or further attacks.
JBoss KeyCloak before 1.0.3.Final allows remote attackers to cause a denial of service (resource consumption) via a large value in the size parameter to auth/qrcode, related to QR code generation.
Red Hat Keycloak before version 2.4.0 did not correctly check permissions when handling service account user deletion requests sent to the rest server. An attacker with service account authentication could use this flaw to bypass normal permissions and delete users in a separate realm.
keycloak before version 4.0.0.final is vulnerable to a infinite loop in session replacement. A Keycloak cluster with multiple nodes could mishandle an expired session replacement and lead to an infinite loop. A malicious authenticated user could use this flaw to achieve Denial of Service on the server.
It was found that when Keycloak before 2.5.5 receives a Logout request with a Extensions in the middle of the request, the SAMLSloRequestParser.parse() method ends in a infinite loop. An attacker could use this flaw to conduct denial of service attacks.
It was found that the keycloak before 2.3.0 did not implement authentication flow correctly. An attacker could use this flaw to construct a phishing URL, from which he could hijack the user's session. This could lead to information disclosure, or permit further possible attacks.
It was found that while parsing the SAML messages the StaxParserUtil class of keycloak before 2.5.1 replaces special strings for obtaining attribute values with system property. This could allow an attacker to determine values of system properties at the attacked system by formatting the SAML request ID field to be the chosen system property which could be obtained in the "InResponseTo" field in the response.
Red Hat Keycloak before version 2.5.1 has an implementation of HMAC verification for JWS tokens that uses a method that runs in non-constant time, potentially leaving the application vulnerable to timing attacks.